Loading...
-9%

JPro Professional Diagnostic Toolbox with Next Step

Original price was: $6,495.00.Current price is: $5,895.00.

Add to Wishlist
Add to Wishlist

Description

The JPRO Professional Diagnostic Toolbox includes, JPRO software, all your cables and adapters, along with the add-on software as described below.
INCLUDES:
  • JPRO Professional Diagnostic Software (Annual Subscription)
  • Next StepTM Service Information
  • DLA+ 2.0 Adapter
  • Type 2 Vehicle Cables (6-Pin & 9-Pin)
  • Type-B OBDII Cables (Ford, GM, Sprinter, Mack & Volvo)
  • USB Cable
JPRO Professional Diagnostic Basic Coverage includes the ability to read & clear codes on the following list. You can also view all live data and perform basic diagnostics.
  • Body and Chassis: Bluebird, Ford, Freightliner, GM, International, Kenworth, Mack, Peterbilt, Sprinter, Sterling, Thomas Built, Volvo, and Western Star
  • Engines: CAT, Cummins, Detroit, Ford, GM, International, Mack, Mercedes, PACCAR MX, Sprinter, Volvo
  • ABS: Bendix, Ford, GM, Haldex, Sprinter, Wabash, WABCO
  • Transmission: Allison, Detroit, Eaton, Ford, GM, Mack, Sprinter, Volvo, ZF
The software will now perform the following bi-directional commands:
  • Cummins – Bidirectional support for the following:
  • Cylinder cut-out for EPA 2002 to Current (ISB, ISC, ISL, ISM, & ISX)
  • DPF Stationary Regen for EPA 2007 to Current (ISB, ISC, ISL, ISM, ISX)
  • Trip Reset for EPA 2007 to Current (All ECUs)
  • Aftertreatment reset for EPA 2007 to Current (All ECUs)
  • Fuel Injector Reset for EPA 2013 to Current (All ECUs)
  • Fuel Leakage Test for EPA10 to Current
  • Fuel Injector Calibration EPA 2007 & EPA 2010 (All ECUs)
  • VGT Actuator Installation & Calibration EPA 2010 to Current
  • VGT Hysteris Test for EPA 2010 to Current
  • DEF Doser Pump Override for EPA 2010 to Current
  • Change road speed, cruise speed, & idle shutdown timer for EPA 2007 to Current
  • DEF System Leak Test (EPA 10 ISB/ISC/ISL/ISX & EPA 13 ISB/ISL/ISX)
  • Detroit Diesel – Bi-directional support for the following:
  • Cylinder cut-out for 2000 to 2014
  • DPF Service Regen for EPA 2007 to Current
  • SCR System Output Component Tests for EPA 2010 to 2013
  • SCR ADS Self Check for EPA2013 to Current
  • DPF Ash Accumulator Reset for EPA 2010 to Current
  • Idle Shutdown Timer EPA 2010 to Current
  • Cruise Speed Limit Changes for EPA 2010 to Current
  • Road Speed Limit Changes for EPA 2010 to Current
  • DEF Quantity Test for EPA 2010 to Current
  • Mack & Volvo – Bi-directional support for EPA 2007 to Current:
  • Cylinder cut-out
  • DPF Stationary Regeneration
  • DPF System Reset
  • Learned data reset
  • Setting parameters (Cruise min/max, speed limits, idle shut-down times, and enable/disable cruise)
  • Trip reports & life of vehicle reports (Only Volvo 2012 & Newer and Mack 20007 & Newer)
  • Enable/Disable Driver Cruise Control
  • EGR Function Test (EPA 2013 to Current)
  • VGT Function Test (EPA 2013 to Current)
  • VGT Monitor Test (EPA 2013 to Current)
  • DEF Pressure System Test (EPA 2013 to Current)
  • International – Bi-directional support for EPA 2007 to Current:
  • Cylinder Cut Out Test (All MaxxForce & N-Series Engines)
  • DPF Stationary Regeneration
  • Aftertreatment Reset for EPA 2007 & 2010 MaxxForce 11/13
  • DOC/DPF Replacement for EPA 2013 N-Series Engines
  • KOER Standard Test for all MaxxForce andN9/N10 Engines
  • SCR Faults Reset for EPA 2013 N-Series Engines
  • Fuel Shutoff Valve for EPA 2010 MaxxForce 11/13
  • Fuel Doser Actuator for EPA 2010 MaxxForce 11/13
  • ETV Position Actuator for EPA 2010 MaxxForce 11/13 and N13 SCR Engines
  • EGR Position Actuator for EPA 2010 MaxxForce 11/13 and N13 SCR Engines
  • Air Management Test for all MaxxForce, N9, and N13 SCR Engines
  • DEF Doser Pump Override Test for N9, N10, & N13 SCR Engines
  • KOER Injector Tests for all MaxxForce & N9/N10 Engines
  • Fuel Pressure Adaption Reset (EPA 2007 to Current MaxxForce 7)
  • Idle Shutdown Time (EPA 2007 & 2010 MaxxForce 7, DT, 9, 10, 11, 13, & 15)
  • Road & Cruise Speed (EPA 2007 & 2010 MaxxForce 7, DT, 9, 10, 11, 13, & 15)
  • PACCAR MX Engines (Does not cover GHG17 Engines)
  • Automated Cylinder Performance Test
  • DPF Service Regen
  • Install a New/Cleaned DPF Filter command
  • DEF Pressure System Test (EPA 2013 & Newer)
  • Isuzu – Supports 2008-2017 Isuzu trucks with either the 5.2L (4HK1) or 3.0L (4JJ1) engine in both North America
  • Cylinder Cut Out
  • DPF Service Regen
  • Ford – Supports 2004 to 2015 Ford models F-Series, E-Series, Transit Connect, and Transit Vehicles
  • Gives users the ability to read and clear faults, read freeze frames, read sensor data, and display emission test results
  • Enables users to run diagnostic tests on components such as Key On Engine Off (KOEO) On Demand Self Test
  • GM – Supports 2002 to 2015 GM models GMC & Chevy 1500, 2500, 3500, GMC Express & Chevy Savana, all GM Medium Duty Vehicles
  • Gives users the ability to read and clear faults, read freeze frames, read sensor data, and display emission test results
  • Supports cylinder cut-outs on all diesel & gasoline engines on years 2002 to 2017 (Except for CAT engines)
  • Tests for 2010 to 2012 Express/Savana with 6.0L gas engines
  • DPF Service Regen for 2010 to 2017 with 6.6L, 2017 GMC Savana, and Chevy Express with 2.8L
  • Sprinter – Supports 2007 to current year
  • Sprinter module gives users the ability to read and clear faults, rear sensor data, and display emission test results
  • Supports EPA 2007 & newer engine tests: Cylinder cut-out, compression test, DPF regen, injector quantity adjustment, mass air flow sensor initialization, and initialize rail pressure
  • Supports instrument cluster (2007-2015) tests: Oil change reset, display dimmer test routine, gauge sweep test, LCD display test routine, and speaker test routine
  • Supports tire pressure monitor – Tire pressure sensor test
  • WABCO ABS
  • ABS Lamp Test
  • Wheel Speed Chart Test
  • Wheel Speed Window Test
  • Bendix ABS
  • ABS Lamp Test
  • Wheel Speed Chart Test
  • Wheel Speed Window Test
This item also includes the JPRO Next Step Service Information Module, powered by JPRO technology, is an add-on subscription to JPRO that automatically links diagnostic trouble codes to repair information and delivers detailed on screen testing and repair information including component locator, connector views, wiring diagrams, removal and install instructions, torque specifications, and more. Next Step also links to some OEM troubleshooting guides for transmission and ABS systems.
Be Advised: This unit will STOP working after 12 months. You are required to purchase the annual renewal fee (Part # 40175-NS) to continue using this machine after 12 months.

Reviews

There are no reviews yet.

Be the first to review “JPro Professional Diagnostic Toolbox with Next Step”

Your email address will not be published. Required fields are marked *

Quick Navigation
×

Cart